4
Electric dispenser EWL 15, 30
A 3 Mains voltage - Mains frequency
Electrical connection.
Check that the local mains voltage and mains
frequency coincide with the specifications
on the rating plate.
A 4 Location
Select the location of the dispenser ®, ˝
so that there is a socket outlet for each dis-
penser.
Mounting can be either on the wall or on
the table using a dispenser stand (extra
accessory).
Allowance must be made for the required
dimensions and weights:
Electric-dispenser 15
Width:
200 mm
Depth:
300 mm
Height
690 mm
Weight empty:
approx 17 kg
Weight full:
approx 32 kg
Electric-dispenser 30
Width:
400 mm
Depth:
300 mm
Height:
690 mm
Weight empty:
approx 26 kg
Weight full:
approx 56 kg
Check the load-bearing strength of
the wal!
A 5 Mounting and connection
Mark the lower mounting height 1385 mm of
the dispenser console # on the wall. Place
the dispenser console # against this line
and mark elongated holes on the wall.
Centre drill these elongated holes with a
12x80 mm drill bit.
Screw on the dispenser console # and
adjust it to the horizontal and vertical.
Check that the rubber packing rings
‰ are directly against the dispenser
console.
