KaVo ERGOcom 3, Инструкция по эксплуатации

Страница: 38 / 58

Instructions for use ERGOcom 3
5 Operation
|
5.3 Operating ERGOcom 3 comfort/excellence
See also: 5.2.1 Operating mode, Page 25
▶ Hold down the VIDEO OUT 2 button for > 2 seconds.
The status display flashes and setting mode is activated.
▶ Select the required VIDEO input port by pressing the VIDEO IN button.
Note
If no entry is made within 8 seconds, the ERGOcom 3 returns to operating mode.
This saves the last setting on the status display.
5.3.7 Audio signals
The audio signals will be linked synchronously to the relevant image signals.
5.3.8 Generate still
Requirement
A video signal is shown on screen 1.
▶ Hold down the Freeze button for < 2 seconds.
The current video signal generates a still on screen 1.
36/54