KaVo ERGOcom 3, Инструкция по эксплуатации

Страница: 30 / 58

Instructions for use ERGOcom 3
5 Operation
|
5.2 Operating ERCOcom 3 classic
▶ Use VGA OUT to select the required VGA input.
Note
If no entry is made within 8 seconds, the ERGOcom 3 returns to operating mode.
This saves the last setting on the status display.
5.2.5 Setting VIDEO OUT 1 image source
The VIDEO OUT 1 button on ERGOcom 3 classic is inactive.
If you select the VIDEO OUT 1 button, 'not available' will appear as a message on
the status display.
5.2.6 Setting VIDEO OUT 2 image source
▶ Hold down the VIDEO OUT 2 button for < 2 seconds.
The last image source selected is shown in the status display. The status display
returns to operational mode after 5 seconds.
28/54