KaVo DIAGNOdent 2191, Инструкция по эксплуатации

Страница: 11 / 32

Instructions for use DIAGNOdent display 2191
3 Description of the product | 3.3 Symbols on product, packaging and rating plate
11 / 32
This KaVo product is intended for use in dentistry only. Any other type of use is
not permitted.
The intended use also includes compliance with all notes provided in the in-
structions for use as well as compliance with prescribed inspections and main-
tenance.
Manipulations of the unit modifying it from its original condition are not per-
missible.
The use of this KaVo product is not permitted in areas subject to an explosion
hazard.
The functional safety and proper condition of the device must be checked be-
fore each use of the device.
The applicable national legal regulations must be observed during the use of the
device, in particular the following:
▪ Applicable regulations governing the connection and startup of medical
devices.
▪ Current occupational safety regulations.
▪ Current accident prevention regulations.
According to these regulations, the user is required:
▪ to only use equipment that is operating correctly
▪ to comply with the specified intended use
▪ to protect him or herself, the patient and third parties from hazards
▪ to prevent contamination from the product
Operators, equipment managers and users in Germany are obliged to operate
their equipment in compliance with the medical device law ("MPG"). The main-
tenance services encompass all the test tasks required in accordance with § 6
of the operator ordinance ("MPBetreiberV").
Product-specific
The DIAGNOdent display 2191 is only intended for dental treatment within the
context of dentistry. It is to be used in a dentist's office or dental clinic.
The DIAGNOdent display 2191 is a remote display of the
DIAGNOdent pen 2190 and provides patient information. To make a diagnosis
with the aid of the DIAGNOdent pen 2190, use the integrated display of the
DIAGNOdent pen 2190. Follow the instructions for use of the
DIAGNOdent pen 2190. Set up the DIAGNOdent display 2191 at a maximum
distance of 1.5 m from the DIAGNOdent pen 2190.
We recommend that you do not place the DIAGNOdent display 2191 in the im-
mediate vicinity of fluorescent lights or powerful light sources since the data is
transmitted by infrared signals and it might cause interference or malfunction.
Only one DIAGNOdent pen 2190 with infrared data transmission may be used
in one room to display the data on the DIAGNOdent display 2191.
A safety check is not required.
3.3 Symbols on product, packaging and rating plate
The product, packaging or rating plates bear the following symbols.
The rating plate is located on the underside of the device.
Accompanying documents
Note: Please note accompanying documents