Kaval LinkNet LNKA800-A Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 12

Kaval LinkNet LNKA800-A Скачать руководство пользователя страница 10

LinkNet™ LNKA800 RF MODULES

!

USER MANUAL

DCM000000054

Printed: 01.05.08,16:18

Revision Date:5/8/01

10

Normal Operation

The LNKA800 Module has six LED’s on the faceplate:

1. OPERATING - Operating normally.

2. STANDBY – Under the control of the Control Module, the LNKC1900

Module has the ability to act as a duplex transmitter, sitting perpetually in
Stand by Mode waiting for the primary transmitter to fail. This LED should
be constant Amber. If a Fault should occur with the primary module, the
“Stand by” unit will immediately become the primary unit, at which time the
Stand by LED will be turned off and the LED’s will show an operating
Module.

3. TRANSMIT – No function on these Modules.

4. RECEIVE – No function on these Modules.

5. PROGRAM – This LED will be constant Amber when the unit is being re-

programmed by the Controller Module. This will signify that the unit is
powered on but unavailable for use.

6. FAULT – Red LED, If the internal diagnostics for the module detect a

problem, then this LED will remain on

«
...
8
9
10
11
12
»

Содержание LinkNet LNKA800-A













Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды