Operating Manual
Original Operating Manual
17
After 50h / every 500h thereafter
Check screws:
(1) for the bolts (2).
Replace loose or damaged screws. Torque the screws as specified in Chapter 6.1
General.
Every 200h
Check wear on:
bolts (2, 8, 10).
buffer (7).
wear on the pressure plate linings (4, 6).
As necessary
Renew worn buffers (7) by unscrewing them and replacing with new buffers.
Renew the worn pressure plates (4, 6) or their linings by demounting the bolt (1) and
pin (2). Replace worn pressure plates and/or linings. Remount pin (2) and close the
bearing with the bolt (1).
Renew worn pins (8, 10) in the arm (3) and arm retainer (12) by demounting the linch
pin (9) or retainer ring (11). Replace worn pins. Remount pins (8, 10) and linch pin (9)
or retainer ring (11).
For optimum lifting, the arm (3) can be swivelled around the arm retainer (12) by
demounting the linch pin (9) and pin (8). After adjustment, ensure that the pin (8) and
linch pin (9) are remounted.
