SYSTEM
LIMITATIONS
Must be read prior to use
Kattsafe recommends that persons using fall arrest
systems do not work alone in case of an emergency
and help is required.
Should any part of the system/equipment have
been subjected to abnormal loading, use must
be discontinued until replaced/recertified by a
competent height safety inspector.
1. Vertical fall arrest systems and vertical ladders require
persons who are competent and trained in the safe use
of the system. It is the responsibility person in control of
the business or undertaking to ensure that they comply
with state work, health and safety regulations and that
they have assessed the hierarchy of risk control measures
and alternative systems cannot be used.
2. The vertical fall arrester is designed for single person use
only rated to maximum user weight - 140kg. (Person and
carry tools).
3. Fall arrest equipment is susceptible to deterioration when
exposed to chemicals or hazardous environments and
must be approved by the manufacturer for use in these
applications.
4. This system, under normal use and environment, has
a life expectancy of up to 10 years. A manufacturer’s
assessment and certification to confirm suitability for an
additional 5 years’ use is recommended. This will depend
on location, usage and scheduled maintenance as per
manufacturer and legislative requirements.
5. The structural requirements for the ladder to which the
vertical fall arrester is connected to must be able to
withstand the loads applied in the event of a fall which is
12kN (see fixing requirements recommendation).
6. The vertical fall arrester is designed for vertical climbing
systems only to ensure correct operation of the fall arrest
device. The fall arrest line system must not exceed 10° off
vertical.
7. Only the approved SL228 vertical line fall arrester with
energy absorber shall be used with this system. An in-line
energy absorber must be installed for any system that
does not include an energy absorber built in with the fall
device.
8. All ladders fitted with a fall arrest system require a
security cover or lockable access door or device to
prevent unauthorised use of the ladder.
9. The vertical line fall arrester is not designed for use on
portable ladders or structures.
10. Do not tamper with or make alterations to system
components without manufacturer’s consent.
11. This system is not to be used for tethering or lifting
machinery or equipment.
12. The vertical line fall arrester must be recertified by a
competent height safety inspector as recommended:
– Non-corrosive/mild environment – 12 monthly
– Corrosive/ harsh environments - 6 monthly (more
frequently inspection may be required)
Copyright, trademarks and product codes are property of Kattsafe. Patents and
design registrations may apply to these products.
5
Kattsafe / Vertical fall arrester / Operation manual
