Chapter 2 Basic Operations
2-4
2. 2 Turning off KIP 7900
1. Press “ ” side on the Power Switch to turn off the printer.
CAUTION
(1) KIP 7900 and the UI look to be shut down when you turn off KIP 7900. However, the
embedded controller is still operating in approximately 2 minutes after Power Switch
operation for the controller’s shutdown.
Do not unplug the KIP 7900 before the controller’s shutdown. Doing so may damage
data or the device.
(2) If you use Dehumidify Heater for Roll Decks, the printer should be plugged while the
printer is OFF. Refer to [2.7 Dehumidifying Roll Media] on page 2-19.
Press this side.
