Instructions:
1. 1U chassis: length: 450mm, width: 230mm, height: 44mm, support 2-9 display splicing, AC220V power
supply, maximum power consumption 50W.
2. The input supports HDMI, VGA, AV, and USB, (up to HDMI2.0 3840*2160@60Hz signal).
3. The HDMI1 to 9 of the output port are respectively connected to the HDMI input port of the terminal
display, and the output supports 3840*2160 and 1920*1080 free switching.
4. After turning the power switch on for about 30 seconds, the screen appears.
5. Factory default HDMI input, if there is no input signal at the front end, the screen will display “No
Signal” dialog box.
6. Frame mask adjustment: If necessary, you can correct the disjointed picture caused by the physical
frame and stitching gap of the TV. It is best to fix the signal source to a human face or a large circular
image, and use the remote control to adjust the picture so that the image can smoothly transition
without morphing at the splicing of adjacent TV sets.
7. Product 1U rack structure, can be directly on the cabinet.
8. The correspondence between the output port number order and the display screen is as shown below:
Made in China
