Kathrein VOS 22/RA, Быстрый старт

Страница: 5 / 8

1 / 4
■
House connection ampli fi ers for modern/new HFC networks
up to 1000 MHz
■
Frequency-dependent gain due to integrated interstage
equaliser (pre-emphasis 8 dB)
■
Variable gain in forward path using slide switches
■
Integrated diplexers
■
LED indicates operational mode
■
Die-cast housing with F-type connectors
■
Delivery scope: VOS 22 (FR/RA), instructions for use
■
VOS 22/FR 20910024
VOS 22/RA 20910025
House connection ampli fi ers
Features
VOS 22/FR
■
Integrated return path 5-65 MHz passive and can be
switched off (switchable using bridging plugs, delivery status
passive)
VOS 22/RA
■
Integrated return path 5-65 MHz active/passive and can be
switched off (switchable with bridging plugs, delivery status
passive)
The ampli fi ers comply with the requirements in the EMC
Directive 2004/103/EC and Low-Voltage Directive
2006/95/EC applicable at the time of shipping.
• The ampli fi er supply voltage is 230 V and is a serious danger to life in the event of direct physical contact!
• The only reliable method of disconnecting the ampli fi ers from the mains is to unplug them.
• Do not touch live parts.
• The power plug must be easily operable as the means of cutting power to the ampli
fi er, meaning the wall outlet must be
close to the ampli fi er and easily accessible.
• The power must be cut when installing or removing the ampli fi er.
• The ampli fi ers must not be operated without the standard fi tted power supply unit guard cover. The cover must be
closed.
• No liquid- fi lled items may be placed on top of the ampli fi ers.
• The ampli fi ers must not be exposed to dripping or splashing water.
• Permissible ambient temperature -20 to +55°C
Basic safety measures
• Installation must be carried out by authorised specialist staff.
• Unplug from the mains before installation.
• The ampli
fi ers described are exclusively for installation of HFC networks up to 1000 MHz.
• Any other use or failure to comply with these instructions will result in voiding of warranty coverage.
• The ampli
fi ers may only be installed in dry indoor areas. Do not mount on or against highly combustible materials.
• The ampli fi ers must be provided with an equipotential bonding wire (Cu, at least 4 mm 2 ) .
• The safety regulations set out in the current EN 60728-11 and EN 60065 standards must be complied with.