3
Connect the USB storage device to one of the two USB 2.0 interfaces on the receiver rear panel. Press the
button to access the receiver’ s main menu. The following display will appear:
Select the “Service menu” with the
buttons and confi rm by pressing
. Next, use the
but-
tons to select “USB Device Management” and confi rm with the
button. The following display will appear
(Example):
If more than one external storage device is connected to the receiver, use the
buttons to select the
storage device to be formatted.
FORMATTING AND SCANNING AN
EXTERNAL USB STORAGE MEDIUM
FORMATTING AN EXTERNAL USB STORAGE MEDIUM
Your external
storage medium
must be formatted
to “FAT32”. If your
storage medium
does not have this
format, you must fi rst format
it in the receiver menu: “USB
Device Management” (see
Messages/Error Messages at
the top of page 15).
If a partitioned USB storage medium is formatted, all partitions are deleted and the
entire hard disk is formatted with a “FAT32” partition.
