Kathrein UFS 640si Скачать руководство пользователя страница 58

Страница: 58 / 80

SETTINGS

The selected menus, sub-menus and positions, as well as the parameters to be set, are each highlighted in
colour. The menus are largely self-explanatory.

Pay attention to the bar at the
bottom of the on-screen display.
These provide information on
what to do next.

Select the “Settings” menu using the

button, the

buttons in the main menu and

Press

to open the “Video and Audio” menu. The following display appears (see next page):

Use the

buttons to select the further options. If there is another sub-menu layer, press the

button

to open it. If there are no more sub-menus, make the settings using the

or numeric pad.

Press the

button to save your settings and return to the previous menu. Press the

button to return

directly to the TV picture, the changes will also be saved.

Содержание UFS 640si

















































































Результаты поиска

Содержание UFS 640si

Отзывы:

Бренды по названию

Популярные бренды

Kathrein UFS 640si, Руководство по эксплуатации

Результаты поиска

Содержание UFS 640si

Отзывы:

Бренды по названию

Популярные бренды