Kathrein UFO 331/TP, Руководство пользователя

Страница: 27 / 72

13 / 14
“Filter” sub-menu
*** UFO331TP ***
T / 001 / 009
Das Erste / - / -
Compile
“Filter” sub-menu
*** UFO331TP ***
T / 001 / 009
Das Erste / + / 1
Compile
For this the “<” and “>” buttons may be used to select the parameters and the “+” and “-” buttons to select between “-”, “1” and “2”.
The
settings become effective when the fi lter table is compiled. This is done using the “<” and “>” buttons; select the “Compile”
parameter and use the “+” or “-” buttons to initiate the compilation of the channel table.
The menu is exited by pressing the “Sub-menu” button . If this brings you back to “Transport stream processor” sub-menu, this can
be exited only when the cursor is on the fi lter's “on/off” parameter.
2. Notes
For use in older base and expansion units see following note.
Note: When expanding existing systems (still using power supply unit BN 1681794), note that the power supply unit
has a lower rating. Therefore check the power consumption information on the power supply unit label.
If the UFG 404 base unit is used, check that the maximum permissible loading of the power supply unit is not
exceeded.
Note: A description of extended functions such as “Cable NIT compilation”, con fi guration of “Pass/Drop PID
lists”, “Logical Channel Number” assignment etc. can be found in the user instructions for the control
elements UFG 300 and USW 30 required for implementing these functions.