Kathrein UFD 580, Руководство по эксплуатации

Страница: 15 / 100

Connection and Setup
15
TV and Video Recorder Connection
Connect the satellite receiver (TV Scart socket) and the TV set by a
Scart cable (see “Connection example”).
If your TV has a stereo feature, you can receive the sound in stereo
via the Scart connection.
Connect the satellite receiver (VCR/AUX Scart socket) and the video
recorder likewise by a Scart cable.
For system reasons, the same video signals are to be found on the
Scart outputs and on the video cinch output.
If you are recording using an external video recorder, remember not to
operate the receiver during recording, otherwise all the on-screen
displays will appear on your recording.
Audio Connection
If you want to play the sound on your hi-fi system, connect the audio
cinch sockets to the input sockets on the hi-fi system with an
appropriate cable (see “Connection example”).
SPDIF Connections (Electrical/Optical)
The electrical SPDIF cinch output and the optical output are for
connection to a Dolby digital system (see “Connection example”).
Inserting Batteries in the Remote Control
Remove the cover on the rear of the remote control.
Insert the two supplied batteries into the remote control. Ensure
correct polarity of the batteries; the + and – markings are indicated
inside the battery compartment.
Slide the cover back into the housing until it locks in place.
Used batteries are special waste.
Do not throw used batteries into your household waste; take them to a
collection point for old batteries.
Electronic equipment is not household waste - in accordance with
directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE
COUNCIL dated 27
th
January 2003 on used electrical and electronic
equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a designated
public collection point.