Kathrein UFD 505, Руководство по эксплуатации

Страница: 9 / 54

Operating elements, displays and connections
Operating elements, displays and connections
This section contains a brief description of all the control elements, displays and
connections. The key symbols presented here are also used when describing op-
erating sequences.
View of front panel
(Flap folded down)
View of rear panel
IF INPUT DIGITAL
920-2150MHz
14/18V max. 400mA
22kHz
VCR
AUX
UFD 505 260494
TV
IF OUTPUT
DiSEqC 1.1
DATA I/O
AC 88V-264V~
50/60 Hz
max.30W
Elektroschock-Gefahr!
Nicht öffnen
L
R
AUDIO VIDEO
DIGITAL
SELECT MENU
Digital Video Broadcasting
DIGITAL SATELLITE RECEIVER
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
Front panel controls and displays Rear panel controls and displays
1 On/Off switch (with mains separation)
2 Menu button to call up or exit from menus
or submenus
3 Indicator to confirm remote control signal
4 Select-button
to confirm a selection
5 Power indicator
6 Standby indicator
7 Cursor keys to step through menus and
programmes, and for adjustment of the vol-
ume (corresponds to the remote control)
8 LED display (4-charachter 7-segment dis-
play) for display of programme position and
time
9 Pressure catch for front flap
Open by lightly applying pressure on the
upper right-hand side
1 Audio output
2 Cinch sockets, left and right channel
2 Dolby Digital-output (AC3)
3 Video output (FBAS)
4 Scart socket TV connection
5 Scart socket VCR/AUX connection
6 DATA socket
Interface for serial data transmission (Ser-
vice)
7 Satellite IF signal input
Output of the LNB supply voltage and con-
trol signals (22-kHz and DiSEqC 1.1)
8 Satellite IF signal output
Output for a analogue secondary receiver.
The Sat IF signal is looped through.
9 Mains voltage supply line
9