Receiver operation
14
Meaning of the columns
Date
Switch-on date.
Start
Start-time for automatic switch-on.
Stop
Switch-off time.
No.
Number of programme slot.
Making settings
After calling up the timer menu the cursor is positioned at the input line. The active
menu entry is shown by means of a flashing cursor (>).
•
Use the numeric keys for the input ...
.
•
When using the numeric keys for input, the day/month and hour/minute entries
must always be entered in two-digit form, thus “02.01." or “08:05" (not “2.1." or
“8:5"). If one of the columns of the input line already contains a value, the
keys can also be used for adjustment.
•
Following correct data entry the cursor jumps to the next column.
•
Invalid entries or incorrect values are not accepted and are ignored.
•
Enter the desired programme slot in the “No.“ column.
•
To enter a radio programme slot press the
key first of all.
Saving settings
•
Press the
key in order to save your settings.
The values entered are placed in the topmost line of the display. The other entries
are all shifted down by one line.
Making changes
If you want to alter a stored setting, place the cursor in the appropriate line by
pressing the
key. Enter the new data in the usual manner and save the new
entries with key
.
To clear a timer that has been set, enter the programme slot as “00“ and save the
entry.
Return to receive mode
•
Press the
key in order to return to receive mode.
Note
If the timer is active, “rEC“ is shown on the VCR LED display.
During the recording period, a switchover to tuner B by means of the
key is dis-
abled. If you press this key the following message appears on the screen:
