Kathrein SAT-IP EXIP 418, Руководство пользователя

Страница: 15 / 16

7 / 8
2. Enter the password
exip
.
➯ It is possible to edit the web interface settings.
The IP address of your EXIP 418 is indicated in the router menu. Alternatively,
the IP address can be determined using a software utility,
e.g. Intel® Tools for UPnP Technology .
You will fi nd more detailed instructions for the web interface at www.kathrein-ds.com .
Troubleshooting
Problem Possible cause Solution
Stream LED
does not
light up
No network connection Connect network cable
Power LED
does not
light up
ON/OFF switch is positioned
on OFF
Check the switch on the rear panel of the
device and set it to ON
Power supply unit is not
connected
Connect the power supply unit to the
server and connect it to the 230-V mains.
Repair and Replacement
autronic electronic service GmbH
Hauptstraße 2a
35798 Löhnberg-Oberhausen, Germany
Phone +49 6477 6123 101
Fax +49 6477 6123 020
E-Mail: service-kathrein@autronic-service.de
Transport and Storage
► Transport and store the device in its original packaging.
► Protect the device against dust, dirt, moisture and direct sunlight.
► Transport and store the device only in the permitted temperature range between -25
and +70 °C. Make sure there is no water condensation build-up.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, KATHREIN Digital Systems GmbH declares that the radio equipment type
EXIP 418, order no.: 20510148 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.kathrein-ds.com