Installation manual Reader
37
Modifications, misprints and errors excepted
English
5. Software
Figure: Saving the configuration in a file
5.3.3.
Menu bar
The menu bar allows the program to be customised to your own requirements. These include for example:
language settings, layout, status messages and calling up the program information. It consists of the items: file,
options and info.
5.3.3.1. File
There are a wide variety of parameters available for configuring the RF front end. A complete setting can be saved
as a parameter set in the menu item file as an XML file, and later reloaded.
Under the item
Save Reader Configuration to File
, a dialogue opens which displays all the available parameter sets
(0 - 7). The selection can be changed by setting the check. Furthermore each parameter set can be described briefly.
Selecting
Save
opens a further dialogue in which a respective save location and a file name must be selected or input,
in order to successfully save the file. The progress of the save operation is shown by a progress bar.
The status field has a context menu which allows deactivation of warnings, information and errors in the status field. Messages that
have expired can be deleted in this menu.
Reloading the settings starts with the selection of the parameter file. In the dialogue which opens, all available parameter
sets are displayed. The assignment of them to the individual save locations can be reassigned here. For this purpose
the desired parameter set on the reader can be selected in the drop-down menu. Selection of the item
None
means
this parameter set is not loaded into the reader. In the default setting a 1:1 assignment applies. Pressing the A
ssign
parameter sets 1:1
button resets all the changes in the assignment to the default. Pressing the
Delete assignment
button deletes all assignments of the saved parameter sets to those in the reader. In the drop-down menu this is
indicated by
None
.
