6
CO Detector FCM 100
Product description:
The CO detector is a sensor that detects the highly toxic carbon monoxide gas and
reports reliably and promptly to the alarm panel whenever the natural level is
exceeded, which triggers the alarm accordingly. The CO detector is battery-operated
and communicates wirelessly with the alarm panel. Cables for signal transmission or
power supply are NOT required.
Sensor data:
Dimension:
130 x 100 x 41 mm (5.11 x 3.93 x 1.61 in)
Weight:
280 g (0.51 lbs)
Place of installation:
Only indoors
Operating temperatures:
-10 °C to +45 °C (14 °F to 113 °F)
Humidity:
Maximum 85% (non-condensing)
Radio frequency:
868.6375 MHz
Certification:
DIN EN50291
Detection method:
Electromechanical CO detector
Internal siren:
85 dB / 1 m distance
1.
Two colour LED
•
Flashes yellow: low battery
•
2 x red + 2 beeps: transmission
•
Flashes red: Alarm
2.
Learn button
•
Activates the learn and range mode
•
Deactivates alarm
Battery:
The CO detector requires three 1.5 V AA batteries. The average battery life is two years.
The CO detector will inform the alarm panel when the batteries are running low (about
two months before they are empty).
Connecting the CO detector and putting it into operation
1.
Insert the supplied batteries.
2.
After their insertion, the CO detector emits two short beeps and the LED
lights up once in red.
3.
Close the housing.
4.
Open the configuration page of the alarm panel, open the menu “Sensors”
“Add”, and press “Start”.
5.
Press the Learn button of the CO detector for about one second.
6.
The configuration page of the alarm panel should list the CO detector.
7.
Add the CO detector.