8
•
The horizontal angle of the PIR motion detector is 110°.
•
The PIR motion detector will detect motions in a range up to 12 meters (13
yd) if it is installed at a height of 2 meters (2.2 yd).
•
To ensure the optimal function of the PIR motion detector, make sure that
the PIR motion detector is installed at a height of 1.8–2 meters (2–2.2 yd)
and that the Learn button is pointing upwards.
Warm-up and rest mode:
Every time the alarm panel is armed or switched to home mode, the PIR motion
detector enters a warm-up phase of approx. one minute. During this time, detected
motions will not trigger an alarm. However, detected motions will increase the warm-
up phase by an additional minute – make sure not to trigger the PIR motion detector
during the warm-up phase in order to minimise the duration of the warm-up.
In order to save battery power, the PIR motion detector enters a rest mode after every
detected motion (irrespective of the mode of the alarm panel). The rest mode takes
approx. one minute and every registered motion during the rest mode will extend its
duration.
•
Do not install the PIR motion detector in the detection range
of another sensor (e.g. an additional motion detector with a
light in front of your door).
•
Do not expose the PIR motion detector to direct sunlight.
•
The PIR motion detector registers movements in the
temperature field. Thus, it can also be triggered by the
movements of air currents. Make sure not to install the PIR
motion detector in areas where air currents with different
temperatures may cause movements (e.g. above
radiators/stoves/furnaces, heated floors, air conditioning,
staircases, or behind windows).
www.kathrein-ds.com
9360000377/b/STM/0321/GB | Subject to change.
KATHREIN Digital Systems GmbH | Anton-Kathrein-Str. 1–3 | 83022 Rosenheim | Germany | Phone +49 731 270 909 70
