Technical Specifi cations
All fi gures are typical values!
Type
CAS 124
Part no.
216236
Diameter
m
1.2
Reception range
GHz
10.70-12.75
Antenna gain at 10.70-11.70 GHz
dBi
41.50
Antenna gain at 11.70-12.50 GHz
dBi
42.15
Antenna gain at 12.50-12.75 GHz
dBi
42.50
Antenna gain at 14.00-14.50 GHz (Transmission frequency range)
dBi
43.6-43.9
Half power beam width (at the centre of the band)
°
1.43
Cross-polarisation decoupling (in main beam direction)
dB
> 30
Resulting from wind tunnel trials:
Wind speed 130 km/h:
Wind load
dynamic pressure
Wind speed 164 km/h:
Wind load
dynamic pressure
Wind speed 200 km/h:
Wind load
dynamic pressure
N
N/m
2
N
N/m
2
N
N/m
2
1395
800
2267
1300
3366
1930
Wind area
m
2
1.292
Clamping range of the mast clamp ZAS 180
mm
75-114
Setting range, elevation
°
5-50
Setting range, azimuth
°
360
Dimensions width (refl ector)
mm
1234
Max. dimensions, height
mm
1501
Max. dimensions, protrusion (from centre of mast to end of feed system EAS XXX)
mm
1441
Packaging size (L x W x H)
mm
1430 x 1441 x 370
Weight approx. net/gross
kg
18.3/30.6
Electronic equipment is not d
omestic waste: in acc
ordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE
COUNCIL dated 27th January 2003 on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this device for disposal at a designated public collection point.
f)
Once the antenna has been correctly aligned
Tighten all the securing elements “B“, “C“ and “D“. Table of tightening torques:
www.kathrein-ds.com | [email protected]
9351534/c/STM/1020/GB | Subject to change.
KATHREIN Digital Systems GmbH | Anton-Kathrein-Str. 1–3 | 83022 Rosenheim | Germany | Phone +49 731 270 909 70
