16 of 28
Measuring SAT, TV and CATV signals
2. Rotate the navigation wheel to select
RECALL DATALOGGER
.
3. Press
RECALL DATALOGGER
.
➯
The
RECALL DATALOGGER
menu opens and
DATA FILE
menu item
is active (marked in green).
4. Press the navigation wheel to activate the data file value (
LOG.1
,
LOG. 2
. etc.).
5. Rotate the navigation wheel to select a data file (
LOG.1
,
LOG.2
etc.).
6. Press the navigation wheel to save the selection.
7. Rotate the navigation wheel to select
RECALL
.
8. Press
RECALL
to open the list with saved measuring results.
➯
The list with measuring results opens.
9. Rotate the navigation wheel to switch between the saved measuring results.
7
Measuring SAT, TV and CATV signals
For more information about measurements, see the MSK 30/L Quick Start Guide.
7.1
General
7.1.1 Selecting a signal type
1. Press
ON/OFF HOME
to open the main menu.
➯
The main menu opens and the
SAT
menu item is active (the icon is larger).
2. Rotate the navigation wheel or use the touch screen to select
SAT
,
TV
or
CATV
.
Tip
Use the main menu on the touch screen or buttons to select
SAT
,
TV
or
CATV
signals.
