8
936.2332
/E
/0905
/8
.1
6
e
If you have selected “Stuffing ON”, the letter
“S”
will appear on the top right corner in the main menu.
The output symbol rate is settable in the operating mode “Stuffing”
(see selection of the operation modes “PRBS”
and “Stuffing” with and without programme filter).
Main menu
Submenu TP
10. Transport stream processor : Programme filter
Selection of the operation mode programme filter
“Prg. filter”
is effected in the submenu
“TP”
. Press the key to
access the
TP
submenu and use the “
+
” or “
–
” key to select the desired setting. Possible settings are :
“Prg. filter” “ON”/ “OFF”. During selection of the programme filter “ON”, the letter
P
will appear on the upper right side.
Exit from this submenu is only possible if the cursor is placed on the parameter “Stuffing”. Use the “
y
y
” or “
z
z
” key
to select point “Stuffing” and return to the main menu with the key.
Note :
Exit from the submenu is possible by pressing the key when the cursor is on the “Stuffing”
parameter. If the key is pressed while the cursor is on the parameter “Prg. Filter”,
the submenu “Prg. Filter” will be opened.
Input
1568
MHz
P
27,500
MS/s
3/4
TP
Output
S21
306,00 MHz
6,875
MS/s
64
QAM
***
UFO 386/TP
***
Stuffing
OFF
Prg.-Filter
ON
< Return:
Submenu >
Note :
If Stuffing is also switched on in the “Programme filter” operation mode, it is possible to change
the output symbol rate or QAM signal bandwidth (see choice of the output symbol rate in the
operation modes PRBS and Stuffing with or without programme filter).
It is possible to edit the programme filter no matter whether the programme filter is switched on or off (see settings
with USW 30). This allows for control or temporary deactivation of this function without a waiting period or need of
re-programming.
If the cursor is placed on the programme filter parameter
“PRG filter”
and the key is pressed, the submenu
“Programme filter” will be opened.
Submenu TP
Submenu TP
First of all, the active programme table of the transponder is read in and the submenu is displayed.
***
UFO 386/TP
***
Stuffing
OFF
Prg.-Filter
ON
< Return:
Submenu >
Note :
The operation “Read-in programme table” can be interrupted with the submenu key .
Reading-in of the
programme table
❚❚ ❚❚ ❚❚ ❚❚
....