KATEK TeleAlarm NurseCall N86, Руководство пользователя

Страница: 32 / 52

32 en | Operation NurseCall N86 Room Transmitter
© TeleAlarm SA N86_UM_EN_V1.1_2021.12_Final
7 Operation
7.1 Description of the eight different states
During operation, the NurseCall N86 Room Transmitter can be set to one of
eight following states:
Each state is indicated by the signal lamp and by a special position of the output
relays.
It is possible to configure the NurseCall N86 Room Transmitter in order that:
–
the Call for Assistance can be triggered only if the Care Personnel is present.
– the device does not manage the Staff Presence. This mode makes sense only
if the output relays are not provided or not used.
The transition to a specific condition depends on the device configuration, of its
actual condition and of the action completed; as shown on the charts in the
following chapters.
State Description
Stand-by No call is being processed.
Help Call without staff
presence The patient has triggered a Call for Help but
the Care Personnel has not yet responded.
Help Call with staff presence
The Care Personnel has responded after a
Call for Help.
Assistance without staff
presence A Call for Assistance has been triggered
without the presence of the Care Personnel.
Assistance with staff presence
A Call for Assistance has been triggered in the
presence of the Care Personnel.
Emergency without staff
presence A Call for Emergency has been triggered
without the presence of the Care Personnel.
Emergency with staff presence
Emergency has been triggered in the presence
of the Care Personnel.
Staff Presence without alarm
The Care Personnel has responded without a
previous call from the patient.
NOTICE!
When the NurseCall N86 Room Transmitter is powered by an external power
supply, the signal lamps follow the state of the corresponding relay outputs.