Katanax X-FLUXER, Руководство пользователя

Страница: 83 / 86

81
8. Double-click on the connection profile you just created to initiate the actual
connection process.
9. You may receive a warning that the connection with the fluxer will not be
encrypted. Tick the box and click on “Continue”.
10. If the initial handshake is a success, you will be prompted for a password,
which is six times the number one: “111111”
11. Tick the box if you want your device to remember your password, then click
“OK” to connect.
12. You are now connected to your fluxer. You can interact with both the
computer (remote) and the fluxer touchscreen (local).
13. To disconnect, close the VNC Viewer window.
14. To reconnect, start this procedure at step 8.
NOTE : If on a given day, the connection fails, it may be because a new IP was
given to the fluxer by your network’s DCHP server. Check the IP address of the
fluxer, and re-configure the VNC connection accordingly.