Katanax X-FLUXER, Руководство пользователя

Страница: 49 / 86

47
Loop operation
Once set to “ON” (green light), this setting will cause the next started fusion
program to be run in endless loops. Right after the last cooling step, the holders
will re-enter the furnace and the fusion program will start over.
Pressing the Stop button cancels the Loop operation, and the instrument resumes
normal operation. (The “Loop operation” switch then automatically toggles back to
“OFF”.)
Movement
testing
To check that the parameters entered and sent work correctly, it is possible to
start motions independently.
The ^^^ button
This button will cause the furnace door to open and the holders to slide/swing
inside.
The vvv button
This button will cause the furnace door to open and the holders to slide/swing
outside.
The <> button
This button starts the rocking motion using generic, preset parameters.
The C button
This button starts the pouring motion (i.e. it rotates the crucibles forward to the
pouring angle).
The U button
This button resets the position of the crucible, to the vertical (loading angle).
Mold fan (on / off)
These buttons start and stop the cooling fan, for testing purposes. This does not
change the way the fan works in normal fusion programs.