24
KATANA S610M Inverter Specialized for Elevator Manual
3.2 Wiring & Configuration of Control Circuit Terminals
3.2.1 Control circuit terminals sequence
Figure 3-4 Control Circuit Terminals
Before the inverter is put into use, the terminals should be accurately wired. The function table of the
control terminals is listed as below:
Table 3-3 Function Description of Control Circuit Terminals
Termin
al No.
Terminal
screen
printing
Name
Function Description
Specification
JP1
Control board interface
JP2
PG card interface
AB type PG card interface
Sin/Cos type PG card interface
CN1
COM
Common
Common port of switch input
Opto-coupler isolation
input
Input impedance: 4.7kΩ;
Input voltage range: 10
～
30V
X1
Multifunctional
Input X1
These terminals are programmable
and can be defined as
multifunctional digital input
terminals. Please refer to functions
description of input terminals
(Common port: COM).
X2
Multifunctional
Input X2
X3
Multifunctional
Input X3
