background image

 

 

 

 
 

1.2 

Intended Applications 

 

Only  use  the  mobile  Microfiltration System MOT-7  as well  as  any  accompanying accessories  /

 

components per 

manufacturer’s instructions. Intended usage is discussed in these instructions. 

 

In  order  to  ensure  the  mobile  Microfiltration  System  MOT-7  can  perform the  described  level  of

 

treatment, the parameters set out must be followed. In addition, the physical and chemical parameters

 

for  drinking  water  as  required  by state-specific requirements for  drinking water  fit for  human

 

consumption must also be adhered to. 

 

The  mobile  Microfiltration  System  MOT-7  has  been  designed  and  built  based  on  state-of-the-art

 

technology, in order to provide safe operation when safety regulations and operating requirements are

 

followed. 

 
 

 

Working on the mobile Microfiltration System MOT-7 as well as operation and use of the

 

system is permitted only when the unit is in good condition technically and when attention

 

is  paid  to  safety  standards  and  to  potential  hazards  as  described  in  these  operation

 

instructions, the handbook, as well as in this supplement. 
Only when these are followed without exception can operators and others avoid the loss

 

of  life  and  serious  injuries or  avoid  interference  with  the 

system’s  operation  or  other

 

material assets. 

 

Appropriately trained specialist must immediately repair malfunctions, damage, or resolve

 

abnormal operations that could compromise safety! 

 
 

 

Safety gloves with sufficient protection must always be worn when performing any
maintenance on the mobile Microfiltration System MOT-7. 

Always  properly  dispose  of  waste  products,  in  particular  fluids  in  the  pump  unit,  at
designated locations or with specialists. 

In  order  to  avoid  accidents  and  possible  work  disability resulting  from  accidents  due  to
improper  operation  of  the  Katadyn  mobile  Microfiltration  System  MOT-7,  please
observe  and  follow  pertinent  safety  procedures.  Improper  handling  of  the  Katadyn
mobile  Microfiltration  System  MOT-7  can  put  health  at  risk.  Operating/handling  duties
may only be performed by trained personnel. 

Only open the filter chamber when it is unpressurized and emptied. 

Before cleaning, maintenance, repair or replacement of parts, the hydraulic unit must first
be depressurized, and the pump unit turned off. These duties may only be performed by
trained personnel. 

Содержание MOT-7



















Отзывы: