10
Filter Unit
The filter unit consists of a filter housing including fittings and framing, a filter cover
including a vent
valve, a filter housing gasket, seven No. 5 filter elements, a cleaning hose, a measuring gauge, a
handheld cleaning device.
5.1
Setup Procedure
Take care that the filter unit is placed in a stable position and that the location surface is dry.
•
Remove the No. 5 filter elements from the package and
screw them hand-tight into the filter housing. Pay
particular attention that you do not tighten them too
much. Over tightening can damage the filters.
•
Next, lay the O-ring seal over the top.
•
Then, close and lock shut the filter housing with the
cover and clamp collar.
