1. CONNECT PLUMBING:
2. CONNECT TO POWER:
3. STARTUP PROCEDURE:
2.1 CHOOSE ONE
POWER SOURCE
ORIENT PERPENDICULAR
TO SUNRAYS
2.2 ATTACH CORRESPONDING CONNECTOR
2.3 CONNECT EXTENSION CORD
2.4 CONFIRM INTAKE IS SUBMERGED,
THEN CONNECT PLUG TO WATERMAKER
1.1 COLOR MATCH HOSE EXTENSIONS
PRODUCT
FEED
COOLING
DISCHARGE
OPERATING CONFIGURATION
1.3 ADD PREFILTER TO FEED
1.4. PUT FEED HOSE END IN SOURCE WATER AND
PRODUCT HOSE END IN CONTAINER
1.2 ADD POST-FILTER TO PRODUCT
LINE (IN CASE OR AT END OF LINE)
3.1 IMMEDIATELY OPEN PRESSURE RELIEF VALVE
UPON POWER UP
3.2 WAIT 10 MINUTES FOR CHEMICAL FLUSH,
THEN CLOSE PRESSURE RELIEF VALVE
3.3 BEGIN SAMPLING WATER WITH TDS
METER. STORE WHEN POTABLE.
<100
0
2590
2590
PLACE BATTERY WITH CONNECTOR IN FOAM CUTOUT
USE KEY TO OPEN PORT
TOOLS AND INSTRUCTIONS FOR MANUAL POWER UNDER WATERMAKER
