2)
Install Filter Cartridge
Press cartridge into external threaded opening of bag until the o-ring can no longer
be seen. This may require some effort. A small amount of silicon grease on the
cartridge o-ring will aid the insertion. Do not grasp the cartridge around the
pleated surface, since it may damage the filter. Attach threaded cap to the
external threads of the bag and turn clockwise to hold the cartridge firmly in place.
Attach output hose to cartridge output barb (Figure 2).
3)
Flush System (Important!)
Before first use, flush system by running approximately 2 liters of water through the
unit to remove harmless carbon dust. Note: discolored water is normal when
flushing. See following section on Normal Operation on how to filter water.
Normal Operation
1)
Make sure filter is properly attached to the bag.
2)
Fill bag with water using separate container. If a separate container is not available, open
bag and fill directly from water source. Do not allow contaminated water to contact
outlet hose.
3)
Close bag by folding ends (Figure 3). Dry bag and outlet hose with clean cloth.
(Figure 2)
Содержание Base Camp Water Microfilter
Страница 1: ...Base Camp Water Microfilter...
