KAT VR KAT Walk Coord 2, Руководство пользователя

Страница: 16 / 51

16
2
1
3
Locate the height indicator on the
back support corresponding with
your body height. When mounting
the device, push forward and firmly
pull it down to ensure it reaches the
lowest position in the socket.
175 (5'9")
185(6'1")
10
Pull out the safety pin, step on
the platform space rods. Mount
the support plate on the upper
bolts of the connecting plate
(According to your height). Tighten the screws with
screwdriver, then tighten the
nuts with wrench. Insert the
safety pin back completely.
Note: Tighten well to space
hazards.
12 11
Cut the cable ties， place the eight base stabilizing feet on the
bottom of the base and fix them with screws. (List: No. 15
gaskets， No. 16 screws). Note: Tighten
firmly to avoid safety
hazards.
16
15
Ensure the harness logo faces
up, remove the bolt heads,
align the bolts with the center
of long slot of the back plate.
* Bolt position can be adjusted to
counteract the rotation deviations
effect caused by uneven ground level.
13
Install the bolt heads. Get
onto the platform, fasten up
and try squatting to test wheth-
er the harness position is comfor-
table. Note: Misaligned or
loosen screws will affect the
device operation.
14
Insert screws into the two top
openings on the back support
outer shell. Pick it up, align with
the back support, press, and
tighten the top screws. Then,
install and tighten the bottom
screws (List： No. 18 screws) .