Kasei KZ-4000TP-PRO-2S, Руководство оператора

Страница: 16 / 32

16
TROUBLE SHOOTING
• Clean or replace the plug if fouled with heavy oily deposits.
• Replace the plug if the center electrode is worn rounded at the end.
• Spark gap 0.6-0.7mm(.023”028”)
• Fastening torque= 145-155kg.cm(125-135in.lb)
TRANSPORT, HANDLING
• Blade guard should be installed when transport,
handing of the unit.
INSTALLING BLADE GUARD
• Clefte the blade guard and install on the blade
,then put the pin into the guard notch.
• The engine should be turned off when the unit is
moved between work areas.
• After the engine has stopped, the muffler is still
hot. never touch hot Parts such as the muffler.
• Confirm that the fuel is not leaked from tank.
EXTENDED STORAGE
• Inspect, clean and repair unit if necessary.
• Remove all fuel from tank.
• Start engine-This will consume all fuel in fuel
line and carburetor.
• Remove spark plug and pour one tea spoon of
clean motor oil into spark plug hole of cylinder-
replace spark plug.
• Store in clean, dry, dust free area.
FAILURE TO START
• Dispose of fuel in tank.
• Insure that fuel is fresh and clean.
• Check fuel filter to make sure it is clean.
(Replace filter if necessary).
• Make sure air filter elements are clean.
• Install new, properly gapped spark plug.
• When there is serious trouble with the unit,
do not try to repair it yourself, but have your
distributor or dealer do it for you.
FAILURES such as difficulty in starting engine,
irrgularity in functions and abnormality in
performance can normally be prevented if careful
attention is paid to all operating instructions and
maintenance procedures. Should the engine not
funtion properly, check the following:
• That the fuel system is in good condition and
fuel is flowing to the engine.
• The ignition system is in good condition and the
spark plug, sparks correctly.
• Compression of the engine is adequate.