ADSL ROUTER
USER MANUAL
17
URL
: URL for the CPE to connect to the ACS using the CPE WAN Management
Protocol. And through ACS (Auto-Configuration Server) you can perform
auto-configuration, provision, collection, and diagnostics to this router.
User Name
: Username used to authenticate an ACS making a Connection Request to
the CPE.
Password
: Password used to authenticate an ACS making a Connection Request to
the CPE. When read, this parameter returns an empty string, regardless of the actual
value.
Periodic Inform Enable
: Whether or not the CPE must periodically send CPE
information to Server using the Inform method call.
Periodic Inform Interval
: The duration in seconds of the interval for which the CPE
MUST attempt to connect with the ACS and call the Inform method if Inform is enabled.
Connection Request User Name
: Username used to authenticate the CPE when
making a connection to the ACS using the CPE WAN Management Protocol. This
username is used only for authentication of the CPE.
Connection Request Password
: Password used to authenticate the CPE when
making a connection to the ACS using the CPE WAN Management Protocol. This
password is used only for authentication of the CPE.
Note: If you want to cancel all modification that you do on the Router, please
select from “Maintenance
Reboot
Factory Default
Configuration
Reboot
” to restore factory default settings.
4.4
Reset Router
1. On the Rear Panel of the ADSL router you will find a small hole with the word
"
reset
" written below it. It's just big enough for a ball-point tip. Insert a ball-point tip
into this little hole (actually it's a reset switch) and keep the ball-point tip in there.
2. You can release the ball-point after about 5 seconds. You have then completed the
full-reset. Your ADSL router will now have its factory default settings. IP address will
be 192.168.1.1 and the subnet mask will be 255.255.255.0. User name will be
admin and password will be admin.
