![background image](http://html.mh-extra.com/html/kasco/robust-aire/robust-aire_assembly-and-installation-manual_657123003.webp)
ROBUST-AIRE DIFFUSER ASSEMBLY MANUAL
2
IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• Use caution when dealing with any electrical equipment.
• Use caution around water.
• Running the system in conditions below freezing may create open areas of water at the diffuser locations
and thin ice in the surrounding area.
• Some areas require warning signs to be posted. The system owner will assume all risks of operating the
Robust-Aire™ system during winter months. Check your local laws and ordinances.
• Do not use boats that tip easily, such as canoes, for installation. Follow all boating safety rules and
regulations, including wearing a PFD (Personal Flotation Device).
• Consult a qualified electrician for electrical installation.
SAFETY FIRST
Electrical Shock Hazard
Electrical Shock Hazard
SUGGESTED TOOLS & SUPPLIES
• 7/16” socket wrench with shaft extension or 7/16” nut driver
• Adjustable wrench
• Flathead screw driver or 1/4” nut driver
• Retrieval ropes longer than the desired installation depth (optional)
• Marker buoy (optional)
INSTALLATION SUGGESTIONS
Make sure to unroll any SureSink™ Tubing before installing the diffuser. Unrolling the tubing will make it
less likely to kink during installation. Also make sure to unroll and connect any additional SureSink™ Tubing
before going to the installation site.
Use a retrieval rope and marker buoy to allow for easy retrieval during maintenance or relocation of the
Robust-Aire™ Diffuser.
WARNINGS:
Back to Contents