Kasco LED4C11-050 Скачать руководство пользователя страница 5

Страница: 5 / 11

RGB4C5 UNIVERSAL LIGHTING

MANUAL

884103 / 2021.1.1

Hardware is provided for basic installation. Check your installation to ensure you have the correct hardware. Additional hardware may

be included, or you may need to purchase it if your installation varies from the diagrams below�

For vertical bracket mounting, use the hard-

ware shown in Figure 6 to fasten the two

brackets together. Then use your existing float

screws through the slot in the Universal brack-

et to secure it�

3. Use 1/4”-20 x 3/4” hex screws (O), flat washers (I), lock

washers (J), and hex nut (K) as shown in Figure 5 to se

cure each Composite light brackets (F) to the Universal

mounting brackets (M).

Use 1/4”-20 x 3/4” hex screws (Q), fender washers (P),

lock washers (J), and hex nut (K) to secure the Univer

sal bracket to the float.

•

Note: Composite light bracket (H) needs to be

flipped upside down for horizontal mounting.

Fig. 5

Fig. 6

4�

Repeat for remaining fixtures, spacing evenly around the float. Adjust the angle of the lights using thumb nuts if desired, being

sure to use the same angle for all fixtures. Cable ties can be used to attach the fixture cords to float, decrease play, and ensure

protection. Cable-tie the light kit power cord to the float opposite the fountain power cord for balance and to prevent damage from

the fountain. Remember: RGBC5 fixtures MUST be properly submerged (approximately halfway) to avoid overheating.

Back to Contents

Содержание LED4C11-050












Результаты поиска

Содержание LED4C11-050

Отзывы:

Похожие инструкции для LED4C11-050

Бренды по названию

Популярные бренды

Kasco LED4C11-050, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LED4C11-050

Отзывы:

Похожие инструкции для LED4C11-050

Бренды по названию

Популярные бренды