USER’S INSTRUCTIONS
IST-USO-0905109
Rev. N. 03 dtd 09/03/2018
IDP109
Page 2 of 2
compressed air line, replace the noise reducer /
breathing tube, air control unit.
Remove the airflow indicator, insert the noise reducer in the
helmet and reconnect the breathing tube to the helmet.
6. MAINTENANCE
6.1 HELMET
- Clean shell with organic solvent free detergent or better still with
soapy water only.
- Clean visor with soapy water only.
- Wash collar with warm soapy water.
6.2 AIR CONTROL UNIT
- The air control units do not require servicing.
- Clean unit with organic solvent free detergent.
6.3 - Periodically replace the noise reducer when the airflow inside the
helmet tends to decrease.
- Replace the noise reducer if the noise inside the helmet increases.
7. CAUTION
7.1 - Do not use the respirator under the conditions described at
paragraph 4.2.
- Do not use the respirator for any reason whatsoever if it does not
pressurize.
7.2 - Do not use the AL1 air control unit unless it is connected to a
source of GRADE D breathable air as described in the Compressed
Gas Association Commodity Specifications G-71.
7.3 - Do not use the respirator if the air pressure is different to that
indicated at point 2.2.
The respirator will not function at an inlet pressure lower than the
minimum prescribed at point 2.2.
7.4 - Do not use the respirator if the airflow is lower than 170 Lpm for
America and 120 Lpm for Europe and Australia.
7.5 - Return to fresh, clean air immediately and take helmet off if:
a) Leakage is detected by smell, taste or eye, nose or throat irritation.
b) Inhaled air becomes extremely hot.
c) Any feeling of nausea, dizziness or ill being develops.
7.6 THE HELMET WILL NOT FURNISH BREATHING PROTECTION
UNLESS IT IS CONNECTED TO A FUNCTIONING AIR CONTROL
UNIT.
7.7 Never alter or modify this respirator in any way.
7.8 Replace the helmet after harsh impacts even if it does not present
visible damage.
7.9 This equipment is to be used only by qualified personnel trained in
accordance with a respirator program as outlined in ANSI Z 88.2-1980.
8 REPAIRS
8.1 For respirator or part replacement contact KASCO authorized
dealers and workshop only.
8.2 Use only original KASCO replacement parts.
8.3 For setting and adjustment of electric parts contact KASCO.
8.4 Do not try to open the air control unit for inspection. Any repair
work is to be carried out by KASCO.
8.5 Should you require technical assistance for problems that could
arise while using KASCO equipment always include the following
information:
a) Type of respirator and unit with lot number.
b) Date of purchase.
c) Name of dealer.
d) Problem.
e) Place of work (indoors or outdoors)
f) Amount of hours worked annually - maximum hours worked.
Also include a sketch or drawing of the type of work carried out if you
feel it might be useful.
9
.
WARNING
11.1 Check the approved respirator configuration and approval label
found inside the respirator packaging and ensure that the respirator is
composed of the correct sub assemblies before use.
It is the responsibility of the user and the employer to determine
that these respirators are appropriate for the intended use.
This respirator does not purify air or filter out contaminants.
Improper respirator use could result in death or serious injury.
11.2 Kasco retains any type of warranty forfeited on the instant and
declines any liability either direct or indirect should our Use and
Maintenance instructions not be adhered to at all times and should
replacement parts other than original Kasco parts be used.
11.3 The liability for the proper operation of the respirator is
irrevocably transferred to the purchaser or user if:
a) the prescribed maintenance is not carried out and/or repairs and
maintenance are carried out on the respirator by untrained
personnel not employed by Kasco or Kasco approved service
centers.
b) the respirator is used in a manner not conforming to its intended
use as specified in the relative product certification/approval.
11.4 IMPORTANT:
Adhere strictly to all instructions, labels and
limitations pertaining to this equipment. If instructions and warning are
not adhered to at all times, respirator effectiveness will diminish and
wearer protection will be reduced
.
LIMITED PRODUCT WARRANTY
KASCO, as manufacturer, warrants to the original purchaser, each product of its own manufacture, for a period of one year from its date of shipment from the factory, to be
free from defects in material and workmanship under normal use and service.
Normal use and service is intended as all the operations specified in the applicable instruction manuals.
This warranty does not apply to any product which has been repaired or altered to adversely affect the performance of reliability of the respirator or other product.
This warranty does not apply to filters and furthermore does not apply to motors and batteries, the expected life of which is stated in the relative instructions manuals.
Neither this warranty nor any implied warranty applies to damage or harm caused by any or all of the following:
1. Freight damage
2. Damage caused by parts and/or accessories or components not obtained from or approved by KASCO.
3. Damage due to misapplication and/or misuse.
The liability of KASCO under the foregoing warranty is limited to the repair or replacement at KASCO’s option without charge for labor or materials of any part upon return of
the entire respirator or other product or of the particular part to the KASCO factory within the warranty period, at the sole expense of the purchaser, which part shall upon
examination appear to the satisfaction of KASCO to have been defective in material or workmanship.
KASCO expressly warrants its products as above stated. Any other intervention on products returned will be charged at the prices in force.
There are no other express warranties.
Any implied warranties, including implied warranty of merchantability or of fitness for a particular purpose, are limited in duration to one year from the date of purchase by the
first purchaser except in States that do not allow time limitations on implied warranties. There is no implied warranty of fitness for a particular purpose or merchantability
when this product is put to a rental use.
No person including any dealer or representative of KASCO is authorized to make any representation or warranty concerning KASCO products on behalf of KASCO or to
assume for KASCO the obligations contained in this warranty.
KASCO reserves the right to make changes in design and other changes and improvements upon its products without imposing any obligations upon itself to install the
same, upon existing products or products then in the process of manufacture.
This warranty does not cover labor expenses for products returned to KASCO within the warranty period for checks or repairs under warranty if said products are found to be
in good working order.
Products returned to KASCO for repairs or replacement shall contain the series or lot number originally affixed to the product at the time of production.
KASCO SRL - Via Romania, 12 - 42124 Reggio Emilia - Italy
Tel: +39 (0522) 308232 - Fax: +39 (0522) 939803 - e-mail: [email protected]
