Kasco 2.3EHA, Руководство по эксплуатации и техническому обслуживанию

Страница: 3 / 13

LARGE SURFACE AERATOR MANUAL 2
SAFETY FIRST
UNIT SPECIFICATIONS
OVERVIEW
Model HP Voltage / Phase / Hz Amperage
Locked Rotor
Amps
Suggested Pond
Size (m²)
Min. Depth
of Operation
8400EAF 2 230 / 1 / 50 8 40 8,000 51cm
2.3EHAF 2 380 / 3 /50 3.3 12 8,000 51cm
3.1EAF 3 230 / 1 / 50 12.6 59 12,000 61cm
3.3EHAF 3 380 / 3 / 50 5 20 12,000 61cm
Cord Length
10m 30m 60m 90m
8400EAF 1.5mm ² 2.5mm ² 4mm ² 6mm ²
2.3EHAF 2.5mm ² 2.5mm ² 2.5mm ² 2 .5mm ²
3.1EAF 1.5mm ² 2.5mm ² 6mm ² 6mm ²
3.3EHAF 2.5mm ² 2.5mm ² 2.5mm ² 2.5mm ²
WIRE SIZE
Moving Machinery
WARNINGS:
Shock Hazard
• NEVER enter the water with the electrical equipment connected and/or in operation.
• All electrical equipment must be Ground fault/leakage current protected. Use of a Ground fault
protective device (GFI, RCD, RCBB, or RCBO type device) is required as directed by local and national
codes.
• Stay clear of all moving parts.
• NEVER run the unit out of water. This will damage the equipment and pose a danger to the operator.
• Use extreme caution around water, especially cold water.
• NEVER lift or drag the unit by the power cord. Always use the ropes or mount to remove it from the
water.
• Do not use waders in deep water or in areas with drop-offs, drastic slopes, or soft bottom material.
• Do not use boats that tip easily for unit installation (such as canoes).
• Follow all boating safety rules and regulations, including wearing a Personal Flotation Device.
• The unit is supplied with an internal grounding conductor. To reduce the risk of electrical shock, be
certain that the unit is plugged in/connected to a circuit with ground fault protection.
• Means for disconnection must be incorporated in the fixed wiring, in accordance with local and national
wiring rules.
• Consult a qualified electrician for electrical installation.