Kasanova TRM000117NOC, Инструкция по эксплуатации

Страница: 15 / 18

15
ELECTRIC CITRUS JUICER
WARNING!
Remove packaging materials, labels, bags and anything else has employed in order to protect
the appliance and place them in a safe place far from reach of children.
Read this instruction manual completely
because it contains important safety prescriptions
and also the way to grant to your product a long and useful lifespan.
Before using the appliance, wash and dry thoroughly all parts coming into contact with food
with a normal dishwashing detergent: cone (1) , juice filter (2) , juice collector (3) juice jar (7) .
Clean the motor body (6) only with a wet cloth.
NEVER immerse the motor body (6) in water or other liquids and never wash it directly
under the tap!
Place the appliance on a horizontal and stable surface away from heat sources.
Assemble the appliance following the sequence shown on page 3.
NOTE:
As shown on page 3, it is possible to rotate the spout (4) so that the juice is poured into the
supplied juice glass (7) or inside another container as you like.
Insert the plug in the socket outlet.
Cut the fruits to be squeezed. Take one half of the fruit and press it lightly onto the cone. The
motor will start automatically and the juice will flow directly into the container, while the pips
and flesh will remain in the filter.
The motor can rotate randomly in both directions. When all of the juice has been extracted,
•
•
•
•
•
•
•
•
•
•
•
PROTECT THE ENVIRONMENT!
KEEP THIS INSTRUCTION MANUAL WITH CARE!
2 – OPERATION
1 – BEFORE USE
This appliance contains several reusable or recyclable materials. At the end of
its life cycle, make the appliance unusable by disconnecting first it from mains
and then, cutting off the power cord. For the disposal of the appliance follow
the regulations which are in force in your place of residence.
Important!
All assembly and disassembly operations must be carried out when the ap-
pliance is switched off and the plug must be disconnected from the socket.
WARNING!
Before carrying out the assembly or disassembly operations,
make sure that the plug of the power supply cable is discon-
nected from the socket outlet.