7
ELECTRIC KETTLE
loss.
•
Do not place the power cord of the kettle near to hot surfaces or sharp
objects.
•
Do not put heavy objects on the power cord, place it such a way that no-one
can walk or damage it.
•
Unplug the kettle by holding the plug, do not pull on the electric wire.
•
The kettle should be used only with the base, which was delivered with it.
The base of the kettle must not be used for purposes other than those for
which it was intended.
•
•
-
ter, boil it and empty. The kettle is ready for common use after repeating this
procedure 5-6 minutes.
•
The appliance is intended only for boiling water.
•
Do not touch, open or move the lid during the boiling water.
KETTLE DESCRIPTION
1. Base with wire storage
2. Power O / I
“I” kettle on
3. Lid opening
4. Lid
5. Light
USER MANUAL OF THE ELECTRIC KETTLE
•
-
de.
•
Set the required length of the power cord, put the rest of the cord into the
base of the kettle (1).
•
•
Fill the kettle with the required amount of water. If the kettle has been over-
kettle may not work properly.
•
Water can be poured through the spout or through the open lid, which
should be properly closed after pouring the water.
•
The water must reach a minimum and must not exceed the maximum level
indicated inside the kettle.
•
Do not pour the water when the kettle is on the base.
1
3
2
5
4
