12 AIR COOLER
REMOTE CONTROL
Functions
Power: ON/OFF
Speed: Speed selection
Mode: Activate the functions “Nature” (AL) & “Sleep Mode” (SP)
Cool: Activate the “Cool Air” cooling function
Timer: Set the timer
Swing: Enable/Disable auto oscillating function
ADDING WATER
To add water, open the hatch on the top side of the product (fig.5).
- Check the water level as the tank fills up (see attachment 1);
- The water level must not exceed the mark “Max”;
- The water level must not exceed the mark “Min” (to use the cooling function)
- Place the iced packs (one at the time) in the tank through the upper hatch, so to cool down the
water temperature.
NOTE: DO NOT add water while the product is running.
NOTE: Only add ice packs after refilling the tank.
USE OF ICE PACKS
As previously mentioned, you can use ice packs for a cooler air temperature.
- Place the ice packs in the freezer until they are fully frozen.
- Place the frozen ice packs in the tank through the hatch in top side of the product.
- For a more efficient use, place one ice pack at the time, so to always have a frozen ice pack
ready (the product includes 2 ice packs).
CAUTION: When filing the ice packs with water DO NOT exceed the “MAX” level (fig.8).
6
5Bis
8
