Fig.7
OPERATION INSTRUCTION
1.
Power on / speed adjustment
•
Please turn the timer knob to “ON” or the required time to activate
the
fan.
•
Then press speed button for speed adjustment
：
0:Off / Stop 1:Low Speed 2:Medium Speed 3:High Speed
2.
Timer
•
Turn the
timer knob to “ON”,
the fan will be operated continuously,
no auto off timer setting.
•
Turn the timer knob to 30, the fan will be off after 30 minutes; 60
means the fan will be off after 60 minutes and so on.
•
Turn the
timer knob to “OFF”, the fan is OFF.
3.
Oscillation adjustment
•
Press down the oscillation knob, the fan is operated in oscillating
mode to swing horizontally. Lift the knob, oscillation will be
stopped.
4.
Height adjustment
•
5.
Angle adjustment
•
Turn off the fan, then lift or press the motor lightly to adjust the
blowing angle.
MAINTENANCE INSTRUCTION
Attention:
•
Please turn off and unplug the appliance before cleaning or maintenance.
•
Clean the surface of the appliance with damp cloth (or add some detergent) and wipe by
dry cloth.
•
Make sure the appliance is dried before use it again.
•
Do not use corrosive detergent or solvent to clean the appliance to avoid any
discolouration or damage.
•
Do not swash with water.
•
Do not use hard objects to clean the fan.
•
Regular cleaning is suggested to avoid dirt blockage that may result in mechanical
failure.
SPECIFICATION
Model No.
KSF1215
Product name
Semi-stand fan
Rated Voltage/Frequency
220-240V~/50Hz
Rated Power
40W
Dimension (W x H x D)
380x830x380mm
Speed button
Timer knob
Oscillation knob
Motor
-6-
-7-
0 1 2 3
ON
OFF
30
60
90
120
150
180
3. Height adjustment pole installation
•
Hold the height adjustment pole and then press the fixture button, then adjust
the pole to the required height and stop pressing on the fixture button.
Finally plug in to the power source (Fig. 7).
Turn off and unplug the fan then hold the height adjustment pole
and press the fixture button, then adjust the pole to the required height
and stop pressing the fixture button.
