4
DRAINAGE INSTRUCTION
While the water tank is full, the compressor and the fan will stop operating and the water tank full
indicator will be on. Please empty the water tank.
*Disconnect the appliance from power source before removing the water tank.
1.
Remove the water tank carefully.
2.
Empty the water tank.
3.
Insert the water tank gently back into the appliance.
CONTINUOUS DRAINAGE
1.
Pull out the water tank (Fig.1).
2.
Connect the drain hole with an 11mm inner diameter water tube (Fig.2).
*Please purchase the water tube.
3.
Ensure another side of the water tube is in the right place for continuous drainage.
Note
The water tube may be frozen in cold weather which will affect the drainage.
Please make sure to install the water tube properly and avoid bending. If the drainage is not
smooth, it may cause water leakage and wet the floors or furnitures.
4. Put the water tank back to its position. Otherwise, operation cannot be started.
Note
The dehumidifying function will stop immediately after shutdown, but there are a small
amount of water will be discharged from the drain hole. When the appliance is not in use for
a prolonged period, please place it for one day before package and storage.
Do not use the appliance continuously for a long time in order to avoid overheat and cause
mechanical damage or hazard.
Fig. 1
Fig. 2
Drain hole
Water tube
