Kartina LIKE TV-203W, Руководство пользователя

Страница: 10 / 23

Getting Started
1. Ensure there is enough space around the player for proper cooling. The space at each side
should be not less than 10 cm.
2. Ensure the RC has batteries installed.
3. Connect the player to your TV and to other A/V equipment in an appropriate way. Use HDMI
connection to get the best possible quality of video and audio. Make sure to switch off the
player and all relevant A/V equipment before connecting them. Ensure your TV and other
A/V equipment are configured to use proper inputs.
4. Connect the power cable to the player and switch the player on using the power switch on
the back panel of the player.
The player will perform its initial loading procedure,
which may take up to about 1 minute.
During the loading procedure, boot logo is shown on the TV screen.
●
If you do not see boot logo on the TV screen when you switch on the player, it may mean
some problem with the connection between the player and the TV or that a wrong video
input is chosen in the TV or A/V receiver/switch. In this case, recheck the cables and the
settings of the TV or A/V receiver/switch, or try to use different cables or a different way of
connecting the player to the TV.
●
If you see boot logo on the TV screen when you switch on the player, but then the picture
disappears and the other picture does not appears during at least 10 seconds, it may
mean that a wrong video output mode is configured in the player. In this case, press the
"MODE" RC button, and then press one of the RC buttons " 1 ", " 2 ", " 3 ", " 4 " or " 5 " to
switch to a different video output mode (see "Quick Setting of Video Output Mode" for
more information).
5.Finally, you should see the initial setup wizard, which will allow you to perform the initial
player configuration. After that you should see the main screen of the player menu.
Kartina LIKE Quick reference guide 10