K a r o M a n u f a c t u r i n g ( P t y ) L t d
Tel: (+27 11) 392-6803 [email protected] www.karo.co.za
3 Platinum Road, Spartan ext 16, 1619 | P O Box 877, Edenvale, 1610
How to program your HiLo Height Adjustable Desk
The HiLo Height Adjustable Desk is simple to program and there are 3 height settings to
accommodate most users. Follow these simple steps on how to use the control panels
various functions.
The Soft‐Touch control panel has a:
‐
digital display;
‐
up and down buttons for the height adjustment;
‐
3 programmable memory position buttons; and
‐
a memory setting button.
How to adjust the height of the desk:
‐
Press the up arrow to increase the height of the desk up to a maximum of 126cm.
‐
Press the down arrow to decrease the height of the desk to a minimum of 72cm.
How to save your favourite heights for ease of use:
‐
Use the up or down arrow to adjust the height of the desk to a comfortable height for you.
‐
Now press and release the Memory button “M”.
‐
The Digital Display will show an “S‐“.
‐
Now press and release any of the numbers 1 to 3 to program your current position.
‐
To program the other 2 additional height settings, repeat the previous four steps and select a number that
has not yet been programmed.
‐
Please note that if you program a different height setting using the same number, the new position will be
saved over the programmed height setting.
Adjusting the height of the desk to a pre‐set height:
‐
To adjust the height of the desk to a pre‐set height, press and release one of the buttons 1 to 3 of the
corresponding pre‐set height you would like to adjust the desk to.
‐
The desk will start moving and will stop automatically once it has reached the pre‐set height.
‐
If at any point you would like to stop the desk whilst in motion, simply press any button on the control panel
to immediately stop the movement of the desk.
….2/
