
1
Figure 4.32
Figure 4.33
4.1.3.7.4 DORSIFLEXION AND PLANTARFLEXION
For occupants who have the symptoms of
Dorsiflexion and Plantarflexion, follow these
instructions as listed below to allow for foot angle.
The range adjustment is +/- 90 degrees. (See figure
4.33)
Ɣ
Loosen the footplate fastener bolts on each plate.
Ɣ
Adjust the plate angle as desired and re-tighten the
footplate fastener bolts.
4.1.3.8 SAFETY BELT
To adjust the safety belt, follow these instructions as
listed below.
4.1.3.8.1 For KM-BT10, safety belt is the standard equipment.
4.1.3.8.2 To adjust the length of the safety belt, identify the
required length.
4.1.3.8.3 Push the two parts of safety belt through the buckle
to make the safety belt longer or shorter. (See Figure
4.34)
4.1.3.8.4 Pull the two parts of safety belt to tighten.
4.1.3.8.5 Push the buckle up to the plastic clip so that the
safety belt cannot slip out of position. (See Figure
4.35)
4.1.3.8.6 Please check that there is no gap between the clasp