Karma VIP 2-T, Руководство пользователя

Страница: 37 / 52

30
right.
4.19.1.3 An occupant restraint system using both a pelvis and harness must
also be fastened to the transport vehicle to insure user safety.
Again, please refer to the restraint system's instructions.
4.19.1.4The attendant / transporter must double-check all fastening points
for proper connection and tightness to assure the wheelchair user's
safety. The attendant / transporter must fully understand the
fastening system's usage and its weight limitations.
4.19.1.5 See http://www.unwin-safety.com/ for more information.
CAUTION:
● When transporting or lifting, never hold on to attachments or accessories
(front/rear wheels, handrims, casters, footrests, armrests, anti-tippers
etc).
● All lifting should be done with a straight back. Straight legs to lift the
wheelchair. Carefully carry it up or down steps; be aware of how you place
your feet, do not cross them and trip yourself up.
4.19.2 Fitting the Front Restraint
4.19.2.1 Connect the straps around the wheelchair frame and caster bracket
as pictured below. The anchor point is marked with a yellow sticker.
4.19.2.2 Take the brakes off and reverse the wheelchair to tension the front
straps. Apply wheelchair brakes (the brakes should be left on
during transport).
4.19.3 Fitting the Rear Restraint
4.19.3.1 Attach rear straps into rail approximately 300 mm behind the
wheelchair backrest.
4.19.3.2 Attached the hooks to the rear frame of the wheelchair as pictured
below. Tension the restraint until the wheelchair is secure.