Karma REVERO, Краткое руководство пользователя, Страница: 70 / 85

68
WHEELS AND TIRES
Wheels and Tires
USING THE TIRE REPAIR KIT
CAUTION: If possible, stop in a safe
place away from traffic. Always ask
passengers to wait in a safe area away
from traffic. Switch on the hazard warning
flashers to alert other road users, then
follow these steps.
1.
If possible, position the wheel with
puncture at the bottom
2.
Release the clear plastic hose from
around the base of the tire compressor
taking care to ensure the sealant
canister remains in place
3.
Detach the 12V power supply connector
and plug into one of the vehicle’s
accessory power supply sockets
4.
Thread the end of the hose onto the tire
valve
5.
Ensure the compressor is standing
upright with the pressure gauge facing
up
6.
Turn on the compressor to inject
sealant and air into the tire
Note: The pressure gauge will initially
show a high pressure while the
compressor pushes the sealant into tire.
Once the sealant has completely
dispersed into the tire, the pressure will
quickly drop and start to rise again as
the tire inflates with air only.
7.
Monitor the tire pressure gauge and
inflate the tire to the recommended tire
pressure
8.
Turn off the compressor and remove
the hose from the tire valve
9.
Wipe of any excess sealant from the tire
valve and wheel rim
10.
If the wheel rim has lifted from the
ground, drive immediately for five miles
(8 km) to distribute the sealant around
the tire. Do not exceed 25 mph
(40 km/h)
WARNING: If the required pressure
cannot be reached after
approximately 25 minutes, or the wheel rim
has not risen from the ground, then the tire
is too severely damaged for a safe repair.
Call Karma Automotive Roadside
Assistance to have the vehicle transported.
Do not drive!
11.
Check the tire pressure once again and
inflate as required, using the black hose
located in the bottom of the compressor