Karma REVERO 2017, Руководство пользователя

Страница: 17 / 168

16
LOCKING AND UNLOCKING THE VEHICLE
Locking and Unlocking the Vehicle
ABOUT THE KEY FOB
The vehicle security system, door locks, and
ignition are controlled by the key fob. The
doors and trunk can be either locked or
unlocked using the key fob. The key fob is
part of the immobilizer system. It operates
in the manner described below.
Passive entry to the vehicle is allowed when
you activate the exterior door handle
switch and you have a registered key on
your person (in your pocket or in your
purse). You can configure the setting to
unlock the driver's door or all doors through
the Central Infotainment Unit (CIU).
The doors can be programmed to use the
Passive Lock feature. When the vehicle is in
Park [P], press the exterior door handle
switch before closing the door. After the
door closes, the doors will lock
automatically and the park lights will flash,
indicating successful activation of the
security system.
The key fob can also be used to activate the
remote pre-conditioning feature.
You have been supplied with two key fobs
which also have an emergency key blade.
OBTAINING REPLACEMENT KEYS AND
KEY FOBS
If you lose a key fob or an emergency key
blade, contact your local Karma Service
Provider to obtain a replacement.
When ordering a new key fob, bring all
available key fobs for the vehicle to your
Karma Service Provider to allow the
system to be reprogrammed. If a key fob or
the key number is not available, your
Karma Service Provider can obtain the key
code from a restricted access database.
USING THE KEY FOB
WARNING: Always remove the key
fob from the vehicle any time you exit
and walk away from the vehicle.
CAUTION: Remove all key fobs from
the vehicle when it is left unattended.
This will ensure the vehicle is left in a secure
condition.
The buttons on the key fob operate as
follows:
1.
Key Fob Lock:
•
Press once to lock the vehicle and
activate the vehicle's security system.
The vehicle's lights will briefly flash to
confirm the security system is active.
Passive Lock:
• When exiting the vehicle, press the
switch on the exterior door handle,
close the door. All doors should lock
and the parking lights should flash
once, indicating the security system is
active.
•
Press once, then press and hold the
lock button for two seconds to
activate the remote pre-conditioning
feature. The lights will flash twice; one
short and one long, to signal
successful activation.