Karma REVERO 2017, Руководство пользователя

Страница: 110 / 168

109
ENGINE COMPARTMENT
POWER STEERING FLUID
WARNING: Power steering fluid is
highly toxic - keep containers sealed
and out of reach of children. If accidental
consumption of fluid is suspected, seek
medical attention immediately.
WARNING: If the fluid comes into
contact with the skin or eyes, rinse
immediately with plenty of water.
WARNING: Do not spill the fluid onto
a hot engine - a fire may result.
WARNING: Power steering fluid
contains chemicals known to the
State of California to cause cancer and
birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING. See
California Proposition 65 Warning 0227.
CAUTION: Seek qualified assistance
immediately if there is a sudden
noticeable drop in the fluid level.
CAUTION: If fluid loss is slow, the
reservoir may be filled to the upper
level mark to enable the vehicle to be
driven to a repair facility for inspection.
However, we do recommend you seek
qualified assistance before driving the
vehicle.
CHECKING THE FLUID LEVEL
Check the fluid with the vehicle OFF,
standing on level ground and the system
cold. Ensure that the steering wheel is not
turned after stopping the engine.
The level of fluid can be seen through the
translucent body of the reservoir. The fluid
level should be between the
MIN
and the
MAX
marks.
FILLING UP THE POWER STEERING
RESERVOIR
CAUTION: It is imperative that the
steering system does not become
contaminated in any way. Always use new
fluid and clean the area around the filler
neck, both before removing the filler cap
and after topping up. Never return drained
fluid to the system.
CAUTION: Power steering fluid will
damage painted surfaces. Soak up
any spillage with an absorbent cloth
immediately and wash the area with a
mixture of car shampoo and water.
1.
Clean the filler cap before removing to
prevent dirt from entering the reservoir.
2.
Remove the filler cap.
3.
Fill the reservoir using an approved
power steering fluid until the fluid level
is between the
MIN
and
MAX
marks.
See “Approved Fluids and Capacities”
on page 112.
4.
Replace the filler cap.